This is an old revision of the document!

Remove the old Java:

  • sudo apt-get purge openjdk*
  • sudo apt-get purge java7*
  • sudo apt-get autoremove

Install needed package:

  • sudo apt-get install dirmngr

Add Keyserver:

  • sudo apt-key adv –recv-key –keyserver EEA14886
  • Add a double “-“ in front of “recover-key” and “keyserver”.

Edit Source list:

  • sudo nano /etc/apt/sources.list

Add these lines to the bottom and exit with CTRL+X, type "Y" and enter twice:

Update repo and install the latest version of Java:

  • sudo apt-get update
  • sudo apt-get install oracle-java8-installer
  • sudo apt-get install oracle-java8-set-default

Check java version:

  • java -version


Raspberry Pi Headless Setup for Profit Trailer

  • Raspberry Pi 3 Model B (+ Power & MicroSD)
  • ProfitTrailer (including bought license key)
  • A Bittrex/Poloniex account for ProfitTrailer
  • And of course a little bit of BTC to trade
  • Download the latest version of Raspbian Stretch with Desktop
  • Burn the firmware IMG on your MicroSD card using Etcher
  • Create an empty file called ssh using a text editor
  • Place the ssh file in the “root” (/boot) of the MicroSD card
  • OPTIONAL for WiFi: Create a file called wpa_supplicant.conf containing this code with your own WiFi credentials(!):

ctrl_interface=DIR=/var/run/wpa_supplicant GROUP=netdev update_config=1 country=US network={ ssid=“Your network SSID” psk=“Your WPA/WPA2 Security key” key_mgmt=WPA-PSK }

  • Place the wpa_supplicant.conf file in the “root” (/boot) of the MicroSD card.
  • Place the MicroSD card inside the Pi (+ LAN if you don't use WiFi)
  • Turn on the Raspberry Pi and wait till the yellow light turns off
  • Open up your console (Terminal, CMD etc.) and ssh into your Pi using:

ssh pi@your_network_id

  • The standard password should be “raspberry” with user being “pi”
  • Once you’re in, update your Raspberry Pi with:
    • sudo apt-get update
    • sudo apt-get dist-upgrade
    • sudo apt-get clean
  • Once done, reboot your Raspberry Pi using sudo reboot
  • Once again, open up your console and ssh into your Raspberry Pi
  • Open up the Raspberry Pi configurator using sudo raspi-config
  • Start by changing the password *(highly recommended for security reasons)*
  • Change Boot OptionsDesktop / CLIDesktop Autologin
  • Change Localisations
    • Change LocaleOKOK
    • Then change your Timezone
  • IMPORTANT: Go to Interface OptionsVNCEnabled
  • Lastly, go to Advanced SettingsResolution1280×720
  • Then Finish these settings and Reboot *(don’t exit using ESC)*
  • Open VNC Viewer and type the network address from your Raspberry Pi
  • Login using username pi and the password you set earlier
  • You’re done configuring your Raspberry Pi (Yehaaaw!)
  • To access your Pi from anywhere, create a VNC Account

(And login using that account on the Pi VNC client)

  • Start ProfitTrailer with just profittrailer in the terminal?
  • Create a file by typing the following command in the terminal:

sudo nano /usr/local/bin/profittrailer

  • Paste the following script inside it:

#!/bin/bash cd ~/ProfitTrailer sudo java -jar ProfitTrailer.jar -XX:+UseConcMarkSweepGC -Xmx512m -Xms512m

  • Close and save the file with ctrl + x (select YES when asked)
  • Give it the right permissions to run from anywhere without sudo:

sudo chmod +x /usr/local/bin/profittrailer

  • Enjoy running ProfitTrailer without typing the whole command

For support please contact:

  • ko/raspberry_pi_guide.1517841357.txt.gz
  • Last modified: 17 months ago
  • by t1m3c